Don’t let it connect to the wifi/internet?

I mean, sure, you have to do the SD card shuffle, but it’ll guarantee you don’t end up having to deal with this.

If you have a more advanced set of network hardware (which it doesn’t sound like you do) you could add a firewall rule to block traffic from the LAN IP of the printer, or for something like Unifi, simply block internet access entirely. But, even then, if you screw it up now or in the future, surprise software updates will happen.

See, IBM (with OS/2) and Microsoft (with Windows 2.x and 3.x) were cooperating initially.

Right-ish, but I’d say there was actually a simpler problem than the one you laid out.

The immediate and obvious thing that killed OS/2 wasn’t the compatibility layer, it was driven by IBM not having any drivers for any hardware that was not sold by IBM, and Windows having (relatively) broad support for everything anyone was likely to actually have.

Worse, IBM pushed for support for features that IBM hardware support didn’t support to be killed, so you ended up with a Windows that supported your hardware, the features you wanted, and ran on cheaper hardware fighting it out with an OS/2 that did none of that.

IBM essentially decided to, well, be IBM and committed suicide in the market, and didn’t really address a lot of the stupid crap until Warp 3, at which point it didn’t matter and was years too late, and Windows 95 came swooping in shortly thereafter and that was the end of any real competition on the desktop OS scene for quite a while.

If you’re running HomeAssistant, you can integrate the printer into HA, and have camera streams and full controls.

If you’re not running HA, well, this is not especially useful.

Huh.

Usually when I run into that I just bounce the Portainer container and it sorts shit out.

Maybe that’s actually causing the tokens to rotate/expire and thus doing the same shit?

Cloudflare tunnels are the thing you’re looking for, if you’re not opposed to cloudflare.

You run the daemon on your local system, it connects to cloudflare, and presto, you’ve bypassed this entire mess.

What, you mean you don’t play games and go “Well that looked great! Well worth my time!” like an awful lot of the AAA game industry appears to think gamers do?

Huh.

Seriously though, I’m curious how we ended up in the make-shit-prettier race and not a make-the-writing-good, or make-the-game-actually-fun, or even things like make-more-than-two-dungeons (looking at you, Starfield) race.

Especially given the cost to me, personally, to keep upgrading my GPU has reached an untenable level: I’m sure as crap not paying $2000 for a new GPU just so we get a few extra frames of hair jiggle or slightly better lighting or whatever.

Listen, is it really a 3d printer hobby if you don’t have 5 or 6 printers, none of which could actually print anything, and five boxes of parts laying around for you to fix your printers?

Oh also see above while planning another printer project, because none of those printers will do something you might want to do.

(/s, kidding, etc, but there’s That Guy somewhere, and you know who you are.)

Oh, that’s neat and I can certainly see why that’s useful.

I have to do a little gcode header swapping by hand because I’m cheap and bought a p1p and am certainly making it do things it’s not really designed to do, and that kind of functionality could save a bit of time.

What is a macro in this context that requires custom firmware?

My googling makes it just look like gcode stuff to work around hardware issues, but I’m confused how that requires Klipper, since you can drop any gcode block you want into any slicer I’ve ever seen?

I was just curious if they had done their own thing. Some companies just ship Cura, some have done their own thing, and I wasn’t aware of which way they went.

I’m not a giant Cura fan* so was just curious.

(* Cura has the problem of trying to be everything for everyone and to do everything anyone ever might want to do, and ends up just being… a bit much.)

The software was easy to pick up.

Are they shipping something other than Cura?

I’m a fan of the Bambu printers because they just simply work.

You want to print something, they print something, done.

If you want to fiddle, then they’re the wrong printers, but if you want to model shit and make things then they’re really hard to beat right now.

And, yes, I have reservations about the closed sourced nature, but honestly ask yourself: are you going to contribute to the code? Are you going to build your own firmware to run on your printer? If the answer is no, then that’s probably not really a concern that should be driving your decisions.

Oh, that makes sense. I was trying to mentally imagine what kind of FDM printer could possibly need that much power and was very much coming up with a blank, lol.

So uh, if I can ask, why?

Like what are you doing that needs this kind of uh, upgrade?

Time to rename the blue shell to The Shell of Equity, I guess?

The best way I’ve heard that described is that for the Bambu stuff, you spend your time fiddling with the thing you want to print, not your printer.

I love my p1p (and it’s several thousand hours and 100kg of filament into ownership and all I’ve had to do is clean the bedplate and replace a nozzle), and really wish there was anyone who was making an open-source printer that’s as reliable and fiddle-free as this thing has been.

I’ve done it twice!

I’ve always debated between it needing to be on my resume as an ‘Achievement’ or not.

Couple of weeks ago. NSI decided to push some of their domains into CLIENT HOLD status, and that will cause DNS resolution to stop working for the domain.

Took down uh, well, everything: https://status.digitalocean.com/incidents/jm44h02t22ck

Honestly, I’d contact their support and ask what their processes are and what timelines they give customers for a response/remediation before they take action.

Especially ask how they notify you, and how long they allow for a response before escalation to make sure that’s something you can actually get, read, and do something about within.

It might not be a great policy, but if you at least know what might happen, it gives you the ability to make sure you can do whatever you need to do to keep it from becoming a larger issue.

This new uh, tactic? of going after a registrar instead of a hosting provider with reports is a little concerning.

There’s an awful lot of little registrars that don’t have any real abuse department and nobody is going to do shit other than exactly this: take it down and worry about it next week when they have time.

It really feels like your choice of registrar is becoming as much or more important than your choice of hosting provider, and the little indie guys are probably the wrong choice if you’re running a legitimate business as you’re gonna need one that has enough funding and a proper team to vet reports before clobbering your site.

On the OTHER hand, Network Solutions is just took down DigitalOcean for no reason, so maybe they all suck?